Linear Electric Push Rod
video
Linear Electric Push Rod

Linear Electric Push Rod

An electric push rod is a power - driven device that converts the rotary motion of an electric motor into the linear reciprocating motion of a push rod. It can be used as an actuating mechanism in various simple or complex technological processes to achieve remote control, centralized control, or automatic control.
Send Inquiry
Description

 

 

An electric push rod is a power-driven device that transforms the rotary motion of an electric motor into the linear reciprocating motion of a push rod. It can be used as an actuating mechanism in various simple or complex technological processes to achieve remote control, centralized control, or automatic control. After the speed of the motor is reduced by gears or a worm gear, it drives a pair of screw-nut mechanisms. This converts the motor's rotary motion into linear motion, and the forward and reverse rotation of the motor is used to complete the movement of the push rod. For example, complex motions such as rotation and oscillation can be achieved through various mechanisms like levers, rockers, or connecting rods. By changing the length of the lever arm, the stroke can be increased or decreased.

Stroke control device

Worm gear transmission form

 

The worm on the motor gear drives the worm wheel to rotate, causing the small screw inside the worm wheel to move axially. The connecting plate then drives the limit rod to move axially accordingly. When the required stroke is reached, the limit switch is pressed by adjusting the limit block to cut off the power supply, and the motor stops running (the control for forward and reverse rotation is the same).

Gear transmission form

 

The motor drives a small screw installed in the inner tube through reduction gears. The screw then drives the nut connected to it to move axially. When the set stroke is reached, the nut's contact presses the limit switch to cut off the power supply, and the motor stops moving (the reverse operation is the same).

 

A potentiometer can be optionally configured to display the stroke status of the push rod's operation. An encoder can also be added to complete the entire stroke in several steps (i.e., start - stop motion).

 

20250223113413

20250223113430

20250223113433

20250223113437

20250223113515

20250223113659

 

 

 

 

Hot Tags: linear electric push rod, China linear electric push rod manufacturers, suppliers, factory

Send Inquiry

(0/10)

clearall